Hello,
I have acquired an official Everdrive MD V2 that appears to be bricked, when i switch the console on i get a black screen, trying to boot into the recovery os by holding down A+B=C on controller No1 doesnt work.
There is a very helpful guide on here that describes removing the flash chip (which i can do), however can i bypass this stage & leave the chip in place but reflash the everdrive via the jtag connector instead?.
Thanks for any help
[HELP-ME] Possible bricked Everdrive MD V2
- robo500
- Delta User Lv1
- Messages : 2
- Enregistré le : jeu. 9 mars 2023 13:01
- Xrider
- Administrateur
- Messages : 3748
- Enregistré le : sam. 14 sept. 2019 10:47
- Localisation : MaskRom
- Contact :
Re: Possible bricked Everdrive MD V2
Hello and welcome to Delta island community Robo500.
The only solution a this time for us, it's to remove the flash.
Sorry
Krikzz have probably developped somme registry for make that, but we don't have it.owever can i bypass this stage & leave the chip in place but reflash the everdrive via the jtag connector instead?.
The only solution a this time for us, it's to remove the flash.
Sorry
- robo500
- Delta User Lv1
- Messages : 2
- Enregistré le : jeu. 9 mars 2023 13:01
Re: [HELP-ME] Possible bricked Everdrive MD V2
Hi Xrider,
Many thanks for your help, ok I will remove the flash.
Thanks
Many thanks for your help, ok I will remove the flash.
Thanks