Passé longtemps sous les radars, je vous présente "Fusion Converter", un convertisseur MVS to AES open source développé par Furrtek.
Toutes les sources sont disponibles sur son Github depuis de nombreuse années :
https://github.com/neogeodev/FusionConverter
Liste de compatibilité disponible ici:
https://wiki.neogeodev.org/index.php?ti ... _converter
Liste des composants :
CHA board:
Jx: MVS connector 2*60pin 2.54mm pitch Sullins EZC60DCTT or EDAC 345-120-520-201
U2: CPLD Altera EPM240T100C5N or EPM240T100I5N
U1: 3.3V 100mA min. LDO 1117-3.3
C1, C3: MLCC 100nF 10V 1206
C2: Electrolytic cap 1~10uF 10V 2.54mm pitch
PROG board:
Jx: MVS connector 2*60pin 2.54mm pitch Sullins EZC60DCTT or EDAC 345-120-520-201
C1, C2, C3: MLCC 100nF 10V 1206
C4: Electrolytic cap 1~10uF 10V 2.54mm pitch
U1, U2: Octal bus transceiver 74HCT245 in SO20W package
U3: Quad 2-input AND gates 74HCT08 in SO14 package
Mechanical:
8x M3x4mm BHC screws
4x Hex 8mm standoffs
Un vilain clone...
Vous avez peut étre connu son clone chinois provenant de la société JGO...
Comme furrtek l'indique dans son GitHub, JGO (JapanGameOnline.com) a cloné illégalement le Fusion Converter, en ne respectant pas les droits d'auteur... Une bien triste histoire...
Note to JGO
You were dumb enough to clone an open-hardware project. You could just have used these files.
You're not respecting the license.
If you cloned a device without paying attention to its open-source nature, that means you would also clone closed-source devices without caring.
From all the people who create things and share them for free: Fuck you.